|
|
|
General
|
|
Ok - so I have a '68, with a 350. The car recently started doing some odd stuff. Not sure what is related, but here goes: The horn would honk randomly - even when the car was parked and key was out! It wouldn't just "honk honk", but mor
|
|
General
|
|
Hello! I have a 69 Firebird coupe. I have owned it for about 6 years, and for that entire time have had no working brake lights. I have replaced the brake pedal switch, the fuse, and now the entire rear pannel wiring harnes. But still no break lihts
|
|
1969 Firebirds For Sale
|
|
Hey all, I have a Liberty Blue 69 400 with an unmolested numbers matching drivetrain. Engine smokes some and there are oil drips from the trans and engine. It runs and drives enough to go a few hundred miles in my opinion. Nothing is missing except
|
|
Body
|
|
I am just about done installing a complete foor pan in my 69 convertible, next comes a complete trunk pan and frame rails. my question is does anyone know the best way to support or brace the car to do this.It is on a rotisserie now and the rear is b
|
|
Parts For Sale
|
|
Billet aluminum March Performance 3 groove crank and matching 2 groove water pump pulley. Both are 6.25" and fit stock balancer and long water pump. Very good condition. $75 for the pair. Steve 407-716-1156
|
|
1969 Firebirds For Sale
|
|
Found this 69 TA clone for sale on youtube. http://www.youtube.com/watch?v=5NZyxz0I_Vs Jeff Whitaker 410-562-9319
|
|
Body
|
|
I am getting ready to replace the left rear frame rail on a 69 Firebird Convertible. Any suggestions where to read up on this and/or any advice? Thanks. Jeff
|
|
1968 Firebirds For Sale
|
|
Hey gang... well I thought I was going to be a car collector... but wife wants a swimming pool for the new house, and unfortunately... all I do is wax this car! Don't like putting any miles on her, so doesn't make a ton of sense for us at this time.
|
|
Body
|
|
Has anyone installed the new repo tail panel? What is the quality like? I'm debating on repacing mine.
|
|
Diecast and Models For Sale
|
|
Look what's coming from Classic Metalworks: http://www.hobbylinc.com/htm/mwi/mwi63031.htm
|
|
1967 Firebirds Wanted
|
|
We are in the Dallas area so we would like to stay within 300 miles. We are looking for something already restored, but not outrageously priced. We don't care if it has matching numbers. Color isn't important, just no convertibles. Power steering
|
|
Parts For Sale
|
|
I have a 1969 front left cocktail shaker available for sale. In great shape, even has rubber mounting gasket for top bracket. Light surface rust, otherwise excellent. Any reasonable offer accepted. Please email me at rpelstring@woh.rr.com if inte
|
|
Parts For Sale
|
|
not mine http://chicago.craigslist.org/chc/pts/974983517.html
|
